Question Starting my chemical journy

[benda]

Hi everyone, I am pretty new here and in chemistry and general.
It's my biggest hobby, I am fascinating with this field
I wanted to ask about materials I have and what I must add to beginning with. My goal is to start with synthesizing Mephadrone.
List of equipment I got :
Glassware: *bakers - 5ml 10ml 25ml 50ml 100ml 200ml 500ml 600ml 700ml
*Erlenmeyer Flasks - 150ml 250ml 500ml 1000ml 1000ml
*Measuring Cylinder - 5ml 50ml 100ml
*Bottle containers - 250ml sealed bottle 250ml glass lid
*glass pipette x2 3ml, 5ml, 10ml
*funnels Borosilicate Glass Separatory Funnel 250ml, 250ml Separatory funnel constant pressure cylindrical shape,constant-voltage funnel, Pressure Equalizing glass funnel
this set : Soxhlet extractor snake-shaped fat extractor 1000ml laboratory condenser tube extraction cylinder glass extraction device
set of 5 sizes glass regular funnels

*
Plastic materials *bottles 120m 150mll, x2 bottles 250ml
*bakers 50ml 100ml 250ml 500ml 1000ml
*Measuring Cylinder 10ml 25ml 50ml 100ml 200ml 250ml
* 70 mm Büchner funnel
* set of few regular funnels

others : few quantitative filters from size 70 -150 ( have few packages), syringe sizes 10ml 60ml 150ml some dropping tubes


laboratory machines: 1000ml Vacuum Filter Apparatus Lab Equipment Filter Flask Glass Filter Sand Core Liquid Solvent Membrane Filter With Rubber Tube
HS5pro JOANLAB Magnetic Stirrer With Heating Digital Display Thermostatic Stirrer Laboratory Hot Plate Magnetic Mixer 2L

Dual-level ratary vane type vacuum pump 2RS-2

Voltage

220V/50HZ

Pumping rate

127L/min

Limit pressure

0.3pa 0.003Mbar

Rotational speed

Power

2800r/min

1/2Hp 373W

Oil consumption

330ml

Joint size

7/16-20 American

Dimensions

About 280*110*215mm

Gross weight

that is most of the things i currently have. i need the community advice on how to proceed from here, i want a boiling round flask bottle 2000-3000l with 3 neck, should i get the flat bottom or the round? Or both needed? i want to get 100mm Filter Bottle Matching Büchner funnel Ceramic Filter Funnel Pumping.
I want to get a heating mantle for a rounded flask. I just overwhelmed with all the things there is to get lol

would love for some guidenss

thanks!!!

​

 

[dnBQByvHb8Zkawbjpx]

Is this a list of what you already have, or a shopping list?

You can make mephedrone comfortably with just 20 % of listed items. You don't need 2-3 liter round bottom flasks to get started - start small so you learn the process and confirm all works as you plan before you scale up and risk losing valuable reagents on mistakes that you might make. The synthesis can be performed in an Erlenmeyer flask or a beaker of the right size, for instance.

You already have a hot plate listed, no need to get a heating mantle. A simple water bath will work just fine as you won't need to heat above 50-60 °C anyway. Even if you decide to recover solvents through distillation a setup with water bath and a hot plate will work fine for most solvents.

The only thing I did not find in this list is magnetic stir bars with teflon (PTFE) coating. Add those, purchase some precursor such as 2b4mp (CAS 1451-82-7), methylamine (CAS 74-89-5) and you have everything to get started. Good luck!

 

[benda]

Thank you for your time yo command
Most of the list is already arrived
But the most desirable thing did not arrive yet ): the hs,5pro magnetic stirring
I am trying to get chemicals. Sadly it is not easy in the middle east
I currently have acetone 99% ethanol HCL 38%% and DCM

 

[Redroom]

This is already good, at least 80% successful. All that's left is cooking.